Intel releases the Arduino 101 firmware source code

• Tweet
• Pin It

A good news for the open source community, directly from Arduino Blog. Now it is possible to add features to the real time operating system (RTOS) that is running on the new Curie platform!

We’re very happy to announce that the source code of the real-time operating system (RTOS) powering the Arduino 101 and Genuino 101 is now available for hacking and study purposes.

The package contains the complete BSP (Board Support Package) for the Curie processor on the 101. It allows you to compile and modify the core OS and the firmware to manage updates and the bootloader. (Be careful with this one since flashing the wrong bootloader could brick your board and require a JTAG programmer to unbrick it).

The firmware runs on the x86 chip inside the Curie module and communicates with the ARC core (which runs your Arduino sketches) using these callbacks.
Right now, the x86 core takes care of handling Bluetooth Low Energy (BLE) and USB communication, offloading the ARC core.
You can use the code which implements these functionalities as a starting point for your custom extra features.

Source: Arduino Blog – Intel releases the Arduino 101 firmware source code

Related Posts

• 

  How to Control NeoPixel Installations via Wi-Fi Using Fishino and NodeMCU with Python
  How to Control NeoPixel Installations via Wi-Fi Using Fishino and NodeMCU with Python
• 

  How to Adjust X and Y Axis Scale in Arduino Serial Plotter (No Extra Software Needed)
  How to Adjust X and Y Axis Scale in Arduino Serial Plotter (No Extra Software Needed)
• 

  Building a 3D Digital Clock with Arduino
  Building a 3D Digital Clock with Arduino
• 

  Creating a controller for Minecraft with realistic body movements using Arduino
  Creating a controller for Minecraft with realistic body movements using Arduino