Pinoccio – WiFi Mesh networking for Arduino and IoT available now!

• Tweet
• Pin It

A wireless Arduino-compatible microcontroller with WiFi, mesh networking, and rechargeable battery. A real-time, streaming REST API. Web-connected right out of the box.

Pinoccio is a solution to add mesh networking capability and WiFi-Internet access to all yout IoT devices, and it is Arduino compatible. Each board can assume the role of Scout in a Troop and one of the Scouts is the Lead to connect internet:

Field Scouts talk to each other using a mesh network (called a Troop), using an extremely low-power radio. This makes them 14 times more power efficient than standard WiFi devices. Slap a WiFi backpack on a Scout to make it the Lead Scout, and connect your entire Troop to the web.

Other features are:

API – free, real-time, streaming, RESTful, and optional

Use our free API, or roll your own, it’s up to you. Our real-time REST API lets you stream data out of each and every Scout. That means you’ll be notified instantly when something changes (pin values, LED, temperature, etc). You can also stream your own reports through the API, and effortlessly query historical data. Check out the API docs.

ScoutScript – instant feedback, no waiting to compile

Compile, test, tweak, repeat. Who has the time? ScoutScript gives you shell-like access to your hardware. Write and edit functions, run commands, read sensors, or send messages — all over-the-air, and instantaneously — no more waiting to compile! We even put a ScoutScript console in HQ, and an easy hq.print function to send it messages – it’s the remote serial console you’ve always wanted! Take a look through the ScoutScript commands.

HQ gives your hardware some GUI goodness

In addition to being able to use the Arduino IDE, Pinoccio HQ gives you a fully-synced, real-time GUI for all your Scouts and Troops. See who’s online/offline, check on battery levels, set pin modes, see (or make) pin changes instantly, mess with the LED, write some ScoutScript… the list really does go on. The best part is – we built HQ with the Pinoccio API. That’s right, everything you see in HQ is driven by the very same API you have access to as an owner of Pinoccio.

Tech Specs:

Microcontroller

• Atmel ATmega256RFR2
• Built-in radio for mesh networking
• 16MHz MCU
• 256k Flash
• 32k SRAM
• 8k EEPROM
• 1.8 – 3.3 volt power

Battery

• Rechargeable LiPo battery (550mAh)
• Charges via micro USB
• Ability to check battery voltage from the microcontroller via a low-power fuel gauge IC.
• You can log into your account to check battery levels.

Connections

• 17 digital I/O pins, including four with PWM
• 8 analog input pins
• 2 hardware UART serial ports
• Hardware SPI port
• Dedicated I2C port
• Micro USB port for charging and programming

Sensors etc.

• On-board temperature sensor
• On-board RGB LED
• External switch support for custom enclosures
• ICSP support for low-level programming
• Open-source hardware

Radio

• 2.4GHz using 802.15.4
• Wireless, over-the-air programming

WiFi

• Web connectivity via the WiFi Backpack – Lead Scout only

Dimensions

Starting from $49 on Crowdsupply: Pinoccio

Related Posts

• 

  How to Control NeoPixel Installations via Wi-Fi Using Fishino and NodeMCU with Python
  How to Control NeoPixel Installations via Wi-Fi Using Fishino and NodeMCU with Python
• 

  How to Adjust X and Y Axis Scale in Arduino Serial Plotter (No Extra Software Needed)
  How to Adjust X and Y Axis Scale in Arduino Serial Plotter (No Extra Software Needed)
• 

  Building a 3D Digital Clock with Arduino
  Building a 3D Digital Clock with Arduino
• 

  Creating a controller for Minecraft with realistic body movements using Arduino
  Creating a controller for Minecraft with realistic body movements using Arduino

3 Comments

1. Pingback: Awesome Internet of Things – Massive Collection of Resources – Learn Practice & Share

2. Pingback: Awesome IoT | Massive Collection & Resources – Doomzday

3. Pingback: Massive IOT Collections & Resources – Quantum Of Thirst