- How to Adjust X and Y Axis Scale in Arduino Serial Plotter (No Extra Software Needed)Posted 3 months ago
- Elettronici Entusiasti: Inspiring Makers at Maker Faire Rome 2024Posted 3 months ago
- makeITcircular 2024 content launched – Part of Maker Faire Rome 2024Posted 5 months ago
- Application For Maker Faire Rome 2024: Deadline June 20thPosted 7 months ago
- Building a 3D Digital Clock with ArduinoPosted 12 months ago
- Creating a controller for Minecraft with realistic body movements using ArduinoPosted 1 year ago
- Snowflake with ArduinoPosted 1 year ago
- Holographic Christmas TreePosted 1 year ago
- Segstick: Build Your Own Self-Balancing Vehicle in Just 2 Days with ArduinoPosted 1 year ago
- ZSWatch: An Open-Source Smartwatch Project Based on the Zephyr Operating SystemPosted 1 year ago
Orange Pi: a new fruit challenging Raspberry Pi!
A new embedded computing board, made in China (Shenzen district) that is challenging the world famous Raspberry Pi.
Its strength is, apart from the highest hardware specs, that the board can host not only linux (Raspbian compatible) but Android as well! Everything at $39!
It’s an open-source single-board computer. It can run Android 4.4 , Ubuntu, Debian, Rasberry Pi Image, it uses the AllWinner H3 SoC, and has 1GB DDR3 SDRAM
Hardware specification
CPU H3 Quad-core Cortex-A7 H.265/HEVC 4K GPU ·Mali400MP2 GPU @600MHz
·Supports OpenGL ES 2.0Memory (SDRAM) 1GB DDR3 (shared with GPU) Onboard Storage TF card (Max. 64GB) / MMC card slot , up to 2T on 2.5 SATA disk
8GB EMMC FlashOnboard Network 10/100/1000M Ethernet RJ45 Onboard WIFI Realtek RTL8189ETV, IEEE 802.11 b/g/n Video Input A CSI input connector Camera: Supports 8-bit YUV422 CMOS sensor interface
Supports CCIR656 protocol for NTSC and PAL
Supports SM pixel camera sensor
Supports video capture solution up to 1080p@30fps
Audio Input MIC Video Outputs Supports HDMI output with HDCP Supports HDMI CEC
Supports HDMI 30 function
Integrated CVBS
Supports simultaneous output of HDMI and CVBS
Audio Output 3.5 mm Jack and HDMI Power Source DC input can supply power, but USB OTG input don’t supply power USB 2.0 Ports Four USB 2.0 HOST, one USB 2.0 OTG Buttons Power Button(SW4), Recovery Button(SW2), Uboot Button(SW3) Low-level peripherals 40 Pins Header,compatible with Raspberry Pi B+ GPIO(1×3) pin UART, ground. LED Power led & Status led Other IR input Supported OS Android Ubuntu, Debian, Rasberry Pi Image Interface definition
Product size 108mm × 60mm Weight 50g
Source: Orange Pi – Orangepi